Results of environmental parameters monitoring compaigns could lead to financial penalties or fines for non-compliance & even in some cases court decisions and actions.
Consequently, this is crucial and compulsory to make sure that equipment used are giving accurate results and thus calibrated by an independent third party with some minimal uncertainties
Analytical Industrial Solutions experience and reference calibration systems could deliver such services in a very short time since we have all certified equipment in our laboratory in Dubai. Moreover, all our generated mixtures are controlled and certified by a set of reference analyzers.
Scope of Calibration
SCOPE OF CALIBRATION
- Ambient Air Quality Monitoring Systems: reference analysers, Near/Non Reference portable or handheld analysers.
- Indoor Air Quality Monitoring Analysers: handheld equipment, stationary detectors, parking gas sensors.
- Stack Analysers: stationary emission monitoring systems, portable stack gas analysers
- Noise Monitoring Instruments: stationary noise monitoring terminal, handheld sonometers.
- Other Parameters: temperature sensors, pressure sensors, water calibration (FTIR Analysers).
Parameters
PARAMETERS
Gases & Dust
- Sulfur Dioxide (SO2)
- Nitrogen Oxide (NO)
- Nitrogen Dioxide (NO2)
- Carbon Monoxide (CO)
- Carbon Monoxide CO High
- Ozone (O3)
- Hydrogen Sulfide (H2S)
- Volatile Organic Compounds (VOC)
- Hydrocarbons (CXHY)
- Ammonia (NH3)
- Carbon Dioxide (CO2)
- Oxygen (O2)
- Formaldehyde (HCHO)
- Particulate Matter (TSP/PM10/PM2.5)
Others
- Noise: 94 dB at 1 kHz
- Flow: 0.01-0.25 l/min; 0.5-10 l/min; 10-60 l/min
- Temperature: 0 to 60°C
- Humidity: 5 to 95% RH
- Water (H2O) FTIR Analysers: 0 to 40 %
Calibration Equipments
CALIBRATION EQUIPMENTS
- Multi Gas Generator (MGC) with Zero Air Generator (ZAG)
- O3 Generator with UV Photometer (NIST Traceable)
- Flow Calibrator
- Low Volume Sampler (LVS) for Dust Particulates
- Micro Balance for Dust Weighting
- Permeation Oven & Tubes (NIST Traceable)
- Certified Gas Cylinders
- A set of Reference Analysers to Certify Gas Mixtures
- Noise Calibrator
- Water Calibrator
Calibration Reports
CALIBRATION REPORTS
- Zero / Span: AAQMS / IAQ / CEMS / Portable Stack
- Span: Noise
- Multi Point Linearity check: AAQMS / IAQ / Flow
- Correlation to Reference Method: PM / Temperature / RH
- Uncertainties Calculations
- Certificates Attachment :
- Gas Cylinders: Manufacturer Certificates
- Multi Gas Calibrator: Mass Flow Calibration
- Zero Air Generator: Maintenance Report
- Ozone Generator & Photometer: NIST Primary Ozone Standard
- LVS: Flow Calibration
- Noise
- Temperature & RH: NIST
